Toro Australia

Toro TMR-1 (Maintenance Remote)

Toro TMR-1 (Maintenance Remote)
Toro TMR-1 (Maintenance Remote)


Designed for use with all remote ready Toro TMC-212, TMC-424, Custom Command and Irritrol Total Control and RainDial controller range. The TMR-1 is a maintenance remote system that allows a single operator to perform irrigation checks and operate the system from up to 2.4 km away

Operates under LIPD class license ACMA frequenices: Up to 2.4 km line-of-sight range without the hassles of ACMA licensing

Operates under LIPD class license ACMA frequenices: Up to 2.4 km line-of-sight range without the hassles of ACMA licensing

Toro Exclusive All Stations Cycle (ASC) Function: Provides one-start system operation for walk-throughs, maximising productivity - 2 minute run times per station

Toro Exclusive All Stations Cycle (ASC) Function: Provides one-start system operation for walk-throughs, maximising productivity - 2 minute run times per station

Quick-Connect System (for Toro Controllers): Allows receiver to easily be moved from one controller to another; circular connector can be bracket mounted or mounted using 1/2" conduit.

Quick-Connect System (for Toro Controllers): Allows receiver to easily be moved from one controller to another; circular connector can be bracket mounted or mounted using 1/2" conduit.

Multi-Controller/Multi-Site: Programmable address allowing selection of up to 999 different remote receivers at controllers.

Multi-Controller/Multi-Site: Programmable address allowing selection of up to 999 different remote receivers at controllers.

LCD display on remote: Display shows signal transmission, watering on HOLD, station watering on, remaining run time, station number, address function and battery charge status.

LCD display on remote: Display shows signal transmission, watering on HOLD, station watering on, remaining run time, station number, address function and battery charge status.

Remote operation of valves: Includes - start, pause/resume, skip, restart and stop of selected stations and fully automatic ASC.

Remote operation of valves: Includes - start, pause/resume, skip, restart and stop of selected stations and fully automatic ASC.

2 year warranty

2 year warranty

Tested to AS/NZS 4268:2003

Tested to AS/NZS 4268:2003

Frequency ACMA LIPD designated channels – (151.82, 151.88, 151.94 MHz) Automatic detection and avoidance of busy channels
Operating temperature range -10° to 60° C Up to 2.4km line-of-sight range and typically 800 metres in obstructed areas Intuitive, easy-to-use keypad Large, easy-to-read LCD display Remotely controls up to 500 stations Battery life indicator Circular connector comes standard with 1.5metre cable Simple, intuitive command set Default run time is 10 minutes Display shows countdown of time left to run Ergonomic design and removable belt clip make for easy handling
Receiver input voltage 22-26 VAC input
Transmitter DC Operating voltage 4-6V DC (4 AA NiMH rechargeable batteries – not included) User may replace rechargeable batteries with standard AA alkaline cells
Battery charger Dual rate 12-hour charger Receiver operates off of the 24 VAC power from the controller FCC, UL-listed
Receiver size 305mm x 76mm (with antenna)
Download Type Information
Detailed Specifications Specifications
TMR-1 User's Guide Manual