Toro Australia

Toro 570 MPR Series – Fixed Arc Nozzles

Toro 570 MPR Series – Fixed Arc Nozzles
Toro 570 MPR Series – Fixed Arc Nozzles


Toro 570 MPR Plus Spray Nozzles – True matched precipitation rates and colour coding by radius are just a few of the performance features of 570 MPR Plus spray nozzles. Fits any 570 pop-up body, shrub adaptor, riser extender or shrub riser.

Matched precipitation rates ensure all nozzles (every radius and pattern) apply water at the same rate

Matched precipitation rates ensure all nozzles (every radius and pattern) apply water at the same rate

Low-flow rates allow for more sprinklers to be placed on the same zone

Low-flow rates allow for more sprinklers to be placed on the same zone

PCDs eliminate fogging, conserve water and provide precise flow rates; available pre-installed or separate

PCDs eliminate fogging, conserve water and provide precise flow rates; available pre-installed or separate

Colour coding by radius for easy identification

Colour coding by radius for easy identification

Complete selection of arcs for all radius options – full, 3/4, 2/3, 1/2, 1/3 and 1/4

Complete selection of arcs for all radius options – full, 3/4, 2/3, 1/2, 1/3 and 1/4

Uniform watering patterns eliminate over and under throw; refined design of part-circle patterns for better arc

Uniform watering patterns eliminate over and under throw; refined design of part-circle patterns for better arc

Precise radius/flow adjustment, will not lose adjustment

Precise radius/flow adjustment, will not lose adjustment

1.5m nozzles adjust to 1m

1.5m nozzles adjust to 1m

Standard and special spray patterns for small areas

Standard and special spray patterns for small areas

Full set of arcs for 3, 2.4 and 1.5m (10', 8' and 5") radius nozzles

Full set of arcs for 3, 2.4 and 1.5m (10', 8' and 5") radius nozzles

1.25m x 5.5m side strip ideal for parking lot medians

1.25m x 5.5m side strip ideal for parking lot medians

0.6m x 1.8m for small planter beds and other narrow areas

0.6m x 1.8m for small planter beds and other narrow areas

5 levels of trajectory

5 levels of trajectory

Convenient nozzle packaging – nozzles and screens packed separately in attached bags

Convenient nozzle packaging – nozzles and screens packed separately in attached bags

Fine-mesh filter screens prevent clogging of lower volume nozzles

Fine-mesh filter screens prevent clogging of lower volume nozzles

Adjustment screw allows up to 25% reduction in radius and complete shut-off

Adjustment screw allows up to 25% reduction in radius and complete shut-off

Flow rate 0.2-17 Lpm
Operating pressure for optimum nozzle performance 200 kPa
Recommended operating pressure range 140-350 kPa