Greensmaster® TriFlex™ Hybrid 3320 (04530)
The all new Greensmaster® TriFlex™ Hybrid Mowers were designed to take precision cutting on a hybrid mower to a completely new level. Adopting the proven Flex suspension, the cutting units float freely over contours and undulations of the green resulting in a superior quality of cut and aftercut appearance. Improved serviceability is another major advantage of the new TriFlex™ models. The tool-free, quick-change cutting units make servicing the cutting units fast and easy and a lift-gate footrest provides easy access to the center cutting unit.| The all-electric reel drive eliminates hydraulic leak points and delivers ample horsepower to handle a broad range of cutting applications. The TriFlex™ Hybrid models address customer's environmental and financial needs with a combination of features that save energy, enhance productivity, extend a product's versatility, and enhance turf health. These innovations combine - making the TriFlex™ Hybrid the first product to earn the EnergySmart™ label from Toro.
InfoCenter; Advanced control for Hybrid models
Easily customize clip for different heights of cut and adjust other operational settings to gain complete machine control. Common operation information displayed includes: reel speed, hours of function, system voltage for reels, diagnostic descriptions, and much more.
Maximize fuel economy to improve cost of ownership.
With more than enough horsepower and highly efficient components, the TriFlex Hybrid models operate efficiently in energy savings mode. While in this mode, engine RPM's are reduced and the all-electric reel drive maintains a constant reel speed. This results in reduced fuel consumption and noise while maintaining quality of cut, performance, and productivity.
Sealed Electrical components for worry-free wash down.
The electrical connectors and components are completely protected permitting machine wash down without worry.
Double A-Arm Suspension
The suspension system maintains full floatation range to prevent gouging or scalping when going over undulations.
Proven Flex Suspension (Patented)
Superior contour following capability utilizes an integrated "Flex" linkage system to allow cutting units to pivot around the center of the front roller to master undulations and prevent side-to-side scrubbing of the putting surface.
Patented DPA Cutting Units
Precision manufactured cutting units with minimal adjustments and the proven ability to maintain adjustment for longer periods of time provide superior cutting performance.
All-Electric Reel Drive
In addition to eliminating hydraulic leaks, each reel motor has a nominal 1.5 horsepower (1.1 kW) that can increase up to 3.0 hp (2.2 kW) during peak load periods. This translates into the power you need when you need it for unparalleled performance in your most challenging cutting or verticutting applications.
Eliminates clip marks at startup of mowing path and provides braking power to stop reels from spinning when cutting units are disengaged for safer operation.
Lift-In-Turn Cutting Units
The suspension system is designed to provide a slight lift to the inside of the cutting units during turns to deliver a consistently level cut and to reduce "triplex ring" for improved playability and turf health.
Exclusive Lift-Gate Footrest
Easy access to the center cutting unit facilitates routine maintenance and repairs, simplifies adjustments, and eliminates the need to put the traction unit on a lift for cutting unit service saving you time, money, and frustration.
Tool-Free, Quick-Change Cutting Units
A single operator can go from cutting Greens at 3.2 mm to cutting a Fairway at 19 mm in just a few minutes. The tool-free, quick-change cutting units make it as easy as 1-2-3.
Superior Clippings Capture
Redesigned clipping capture system maintains a consistent gap between the basket and reel to retain nearly all grass clippings for a cleaner and healthier cut. In addition, a discharge shield forces clippings inside of basket and minimizes "blow-by".
Balloon Style Tyres
Tyres have been redesigned to deliver uniform loading across the entire cross-section (load footprint area) to eliminate side wall loading that can create visible tyre tracks.
Perfect Triangle Wheel Stand Design
The Triangle Wheel Stand places the rear wheel track within the radius of the front wheel, which prevents accidentally dropping the rear wheel into a nearby sand bunker while making the turn for the next mowing path.
Faster Transport Speeds
16.1 km/h transport speeds will allow you to stay ahead of golfers and get more greens cut in a shorter time.
|Engine||Briggs & Stratton® Vanguard™, Gross 21 hp (15.6 kW) V-Twin, Air Cooled Gasoline Engine Governed to 2550 RPMs; Displacement 38.3 cu.in. (627 cc).|
|Fuel Capacity||22.7 liter.|
|Mowing Speed||0-8 km/h.|
|Transport Speed||0-16 km/h.|
|Cutting Width||150 cm.|
|Blade Type||8-Blade, High carbon steel blades; 11-Blade, High carbon steel blades; 14-Blade, High carbon steel blades.|
|Engine Displacement||627 cc.|
|Height of Cut||Bench HOC 1.6 - 7.5 mm With High HOC Kit 7.3 - 25.4 mm.|
|Reel Diameter||12.7 cm.|
|Hydraulic Fluid||20.8 liter tank.|
|Reel Drive||48-Volt System (4-12V) 9A-H Sealed, Maintenance-free VRLA batteries.|
|Reel Speed||Approximately 2050 RPM at 2850 engine RPM. Adjustable Steering Controls Power Steering.|
19 x 10.5 x 8, 2-ply pneumatic tubeless, smooth tread, Balloon-style tyres.
|Warranty||Two-year limited warranty. Refer to the Operator’s Manual for further details.|
The breakthrough result of more than 30 years of tape research, development and manufacturing.