Toro Australia

Reelmaster® 3100-D with Sidewinder (03171)

Reelmaster® 3100-D with Sidewinder (03171)
Reelmaster® 3100-D with Sidewinder (03171)

The Reelmaster® 3100-D is available with Sidewinder® - Toro's exclusive system that gives operators the ability to shift all three reels left or right while on the fly - providing up to 58 cm of overhang and decreased tyre tracking.



Sidewinder cutting units shift left and right a total of 24 inches (61 cm). This increases the cutting unit overhang for precise trimming. The tyre tracks can also be shifted within the mowing path to reduce wear on the turf.

Powerful Engine

Powerful Engine

With a 21.5 hp (16 kw) Kubota® Diesel Engine, the Reelmaster® 3100-D has the power to climb and power to cut through difficult mowing conditions.

Dual Precision Adjustment (DPA) Cutting Units

Dual Precision Adjustment (DPA) Cutting Units

Precision machined cutting units maintain levelness and hold adjustments. DPA allows quick bedknife to reel adjustment. Harder reel and bedknife steel retain a sharp edge up to 3 times longer to minimize the need and frequency of adjustments, backlapping and grinding leading to healthier turf that stays green.

183 or 216 cm Width of Cut

183 or 216 cm Width of Cut

The Reelmaster® 3100-D is available in a 183 cm or 216 cm ( 72” or 85”) width of cut. With a choice of 5, 8, and 11 blade reels and adjustable reel speed control, this mower can be configured to meet all mowing applications.

Superior Traction

Superior Traction

The patented Series/Parallel 3-wheel drive system provides power to at least two wheels at all times. The result is impressive traction in hilly and wet conditions, and minimal wheel slip so it's gentle on the turf.

Ease of Service

Ease of Service

With the engine located in the rear of the machine, the Reelmaster® 3100-D is easy to service. Open the engine compartment to have access to all filters, fluids and engine components for fast preventative maintenance.

Out-Front Operator

Out-Front Operator

The operator sits out-front on the Reelmaster® 3100-D for better mowing visibility and easier access getting on and off the machine. Engine noise, vibration, and exhaust are all located behind the operator.


21.5 hp (16 kW) Kubota® liquid-cooled diesel, 3-cylinder 

Cutting Width

183 cm or 216 cm 

Fuel Capacity

28 litres

Transport Speed

0-14 km/h

Mowing Speed

0-10 km/h

Height of Cut

6.35-63.5 mm

Traction Drive

Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive


Forward and reverse traction control pedals, mow/transport lever, hand activated park brake, ignition key switch, tilt steering wheel lock, PTO switch, throttle, joystick control for cutting unit raise and lower (and for moving cutting units side-to-side on Sidewinder equipped models), cutting unit transport lock, reel speed and backlap control knob.

Steering Control

Power steering with tilt steering wheel


Front: 20 x 12-10, 4-ply Turf Tread
Rear: 20 x 10-10, 4-ply Turf Tread

Cutting Unit Configuration

Operator controlled moveable cutting units travel ±12" (30 cm) left or right from center; total of 24" (61 cm) of infinite variability.


Height: 180 cm with ROPS
Length: 248 cm
Wheel base: 142 cm
Transport Width: 203 cm in 183 cm woc; 234 cm in 216 cm woc


Approximately 844 kg with cutting units


2 years limited warranty. Refer to operator’s manual for further details.