Toro Australia

Toro F700 Hydrocyclone Separator

Toro F700 Hydrocyclone Separator
Toro F700 Hydrocyclone Separator


700 Series Hydrocyclone

For use prior to primary filtration with well or bore water. Ideal for removing large volumes of suspended material denser than water and to reduce the load on the primary filter

For use in all forms of irrigation

Inlet/Outlet – BSPM threads on 25,40 and 50 mm – Flanged table D on 80,100, 150 and 200 mm

Inlet/Outlet – BSPM threads on 25,40 and 50 mm – Flanged table D on 80,100, 150 and 200 mm

90 degree Inlet/Outlet configuration

90 degree Inlet/Outlet configuration

Baked epoxy coated carbon steel construction

Baked epoxy coated carbon steel construction

Manual operation

Manual operation

Dirt collector (sump) included with each unit

Dirt collector (sump) included with each unit

Maximum operating pressure: 800 kPa

Maximum operating pressure: 800 kPa

Size available 25 mm – 200 mm

Size available 25 mm – 200 mm

Flow range: 3.5 to 370 m³/hr

Flow range: 3.5 to 370 m³/hr

Centrifugal flow action causes particles to precipitate down the wall of the unit and into the dirt collector

Centrifugal flow action causes particles to precipitate down the wall of the unit and into the dirt collector

Note: It is critical when selecting the correct unit to ensure that the flow rate passed through the unit falls within the 25 to 50 kPa head loss region (shown shaded on the chart).

Download Type Information
F700 Hydrocylone Performance Chart Chart
F700 Hydrocylone Specifications Specifications